Publications
-
3D microwave printing temperature control of continuous carbon fiber reinforced composites
Li, N.; Link, G.; Jelonnek, J.
2020. Composites science and technology, 187, Article: 107939. doi:10.1016/j.compscitech.2019.107939 -
Energy Efficiency, Materials and Resources (EMR): Energy-Efficient Processes -Multiphases and thermal processes-
Baureis, L.; Frank, J.; Hofele, J.; Jelonnek, J.; Layer, S.; Link, G.; Neumaier, D.; Nuss, V.; Ramopoulos; Seitz, T.; Soldatov, S.; Wadle, S.
2019. Annual Report 2017 / Institute for Pulsed Power and Microwave Technology / Institut für Hochleistungsimpuls- und Mikrowellentechnik, 41–47, KIT Scientific Publishing. doi:10.5445/IR/1000091764 -
TOMOCON: A Marie Skłodowska-Curie European Training Network on Tomography-based Control in Industrial Processes
Hampel, U.; Wondrak, T.; Fjeld, M.; Mudde, R.; Portela, L.; Kenjeres, S.; Legendre, D.; Link, G.; Koiranen, T.; Hlava, J.; Babout, L.; Jackowska-Strumiłło, L.; Soleimani, M.; Vaukhonen, M.; Lähivaara, T.; Rymarczyk, T.; Trepte, M.; Voutilainen, A.; Rodriguez, M.; Bos, J.; Betz, S.; Hysky, J.; Pennerstorfer, P.; Goldammer, M.; Matten, C.; Hoffmann, R.; Gingras, J.-P.; Plas, D. van der; Veenstra, P.; Nurmi, J.; Pudack, C.; Silva, M. J. da
2018, September 6. 9th World Congress on Industrial Process Tomography (WCIPT-9 2018), Bath, United Kingdom, September 2–6, 2018 -
Energy Efficiency, Materials and Resources (EMR): Energy-Efficient Processes – Materials Processing with Microwaves
Ayhan, K.; Baureis, L.; Jelonnek, J.; Kayser, T.; Layer, S.; Lepers, B.; Link, G.; Neumaier, D.; Nuss, V.; Ramopoulos, V.; Seitz, T.; Soldatov, S.; Sun, Y.; Wadle, S.
2018. Annual Report 2016 / Institute for Pulsed Power and Microwave Technology / Institut für Hochleistungsimpuls- und Mikrowellentechnik, 89–95, KIT Scientific Publishing. doi:10.5445/IR/1000081156 -
Development of an advanced microwave calorimeter for monitoring of chemical reactions
Ramopoulos, V.; Soldatov, S.; Hetz, M.; Link, G.; Jelonnek, J.
2017. IMPI’s 51st Annual Microwave Power Symposium, Miami, FL, June 20-22, 2017. Proceedings, 64–66, International Microwave Power Institute (IMPI) -
Investigation on mm-wave sintering of metal powder compacts using in-situ dilatometry and electrical resistivity measurements
Mahmoud, M.; Link, G.; Jelonnek, J.; Thumm, M.
2017. (A. G. Litvak, Ed.) The European physical journal / Web of Conferences, 149, Art. Nr. 02007. doi:10.1051/epjconf/201714902007 -
Characterization and modeling of epoxy resin reaction kinetics by use of in-situ dielectric measurements
Prastiyanto, D.; Link, G.; Jelonnek, J.; Thumm, M.
2017. Materials Science and Technology Technical Meeting and Exhibition (MS&T 17), Pittsburgh, PA, October 8-12, 2017 -
The cavity perturbation method: implementation limits for ’classical’ and ’extended’ numerical approaches
Soldatov, S.; Link, G.; Jelonnek, J.
2017. 16th International Conference on Microwave and High Frequency Heating (2017), Delft, Netherlands, September 18–21, 2017 -
Transient dielectric characterization of epoxy resins during curing
Prastiyanto, D.; Link, G.; Jelonnek, J.; Thumm, M.
2017. 16th International Conference on Microwave and High Frequency Heating (2017), Delft, Netherlands, September 18–21, 2017 -
Investigation on mm-wave sintering of metal powder compacts using in-situ dilatometry and electrical resistivity measurements
Mahmoud, M.; Link, G.; Jelonnek, J.; Thumm, M.
2017. Strong Microwaves and Terahertz Waves : Sources and Applications, 10th International Workshop, Nizhny Novgorod, RUS, July 17-22, 2017, 62–63, Russian Academy of Sciences -
Investigation on mm-wave sintering of metal powder compacts using in-situ dilatometry and electrical resistivity measurements
Mahmoud, M.; Link, G.; Jelonnek, J.; Thumm, M.
2017. 10th International Workshop Strong Microwaves and Terahertz Waves: Sources and Applications, Nizhny Novgorod, RUS, July 17-22, 2017 -
Development of an advanced microwave calorimeter for monitoring of chemical reactions
Ramopoulos, V.; Soldatov, S.; Hetz, M.; Link, G.; Jelonnek, J.
2017. 51st Annual Microwave Power Symposium (IMPI 2017), Miami, FL, USA, June 20–22, 2017 -
Hydrogen from solids by microwave influence N/A
Sanz-Moral, L. M.; Navarrete, A.; Sturm, G.; Link, G.; Stefanidis, G.; Rueda, M.; Martin, A.
2016. 3rd Global Congress on Microwave Energy Applications (GCMEA), Cartagena, E, July 25-29, 2016 -
A drying and thermoelastic model for microwave ablation of concrete
Lepers, B.; Link, G.; Jelonnek, J.
2016. 80. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Regensburg, 6.-11.März 2016.Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.51(2016), DF 6.6 -
Principles of design for industrial microwave applicators
Link, G.; Ramopoulos, V.; Jelonnek, J.
2015. 15th International Conference on Microwave and High Frequency Heating, Krakow, PL, September 14-17, 2015 Proceedings, 93, Department of Chemistry and Technology of Polymers -
Microwave system for in-situ dielectric and calorimetric measurements in a wide temperature range using a TE111-mode cavity
Ramopoulos, V.; Soldatov, S.; Link, G.; Kayser, T.; Gehringer, M.; Jelonnek, J.
2015. Proceedings of the International Microwave Symposium (IMS 2015), Phoenix, AZ, USA, May 17-22, 2015, Article 7166906, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/MWSYM.2015.7166906 -
Microwave crystallization of phosphate based glass for Li-ion batteries application
Mahmoud, M. M.; Cui, Y.; Ziebert, C.; Rohde, M.; Link, G.; Seifert, H. J.
2015. Materials Science and Technology (MS & T 2015), Columbus, Ohio, October 4-8, 2015 -
Development of a 10 kW microwave applicator for thermal cracking of lignite briquettes
Lepers, B.; Seitz, T.; Link, G.; Jelonnek, J.; Zink, M.
2015. Frontiers in heat and mass transfer, 6 (20), 1–6. doi:10.5098/hmt.6.20 -
Long-range correlation properties of quasi-coherent modes at TEXTOR
Krämer-Flecken, A.; Soldatov, S.; Xu, Y.; Arnichand, H.; Hacquin, S.; Sabot, R.
2015. (TEXTOR Team, Ed.) New journal of physics, 17 (7), 073007/1–17. doi:10.1088/1367-2630/17/7/073007 -
Modelling of microwave assisted bonding of synthetic leather to plastic substrates
Soldatov, S.; Meiser, J.; Lepers, B.; Link, G.; Jelonnek, J.
2015. 15th International Conference on Microwave and High Frequency Heating, AMPERE 2015, Krakow, Poland, 14. - 17. September, 2015. Proceedings, CD-ROM, Cracow University of Technology -
Simple design principles for industrial microwave applicators
Link, G.; Ramopoulos, V.; Jelonnek, J.
2015. 15th International Conference on Microwave and High Frequency Heating, Krakow, PL, September 14-17, 2015 Proceedings, CD-ROM -
Thermal cracking of lignite briquettes for gasification in pressurized reactors with a 10 kW microwave applicator
Lepers, B.; Link, G.; Jelonnek, J.; Zink, M.
2015. 15th International Conference on Microwave and High Frequency Heating, Krakow, PL, September 14-17, 2015 Proceedings, CD-ROM, Cracow University of Technology -
Review technology for efficient curing of fiber composites, an overview about the FLAME project
Kayser, T.; Link, G.; Sun, Y.; Ghomeshi, R.; Betz, S.; Köster, F.; Weiß, R.; Heidbrink, F.; Nuss, V.; Seitz, T.; Jelonnek, J.
2015. 15th International Conference on Microwave and High Frequency Heating, Krakow, PL, September 14-17, 2015 Proceedings, CD-ROM -
Possibility for iron production using high-power millimeter waves
Takayama, S.; Link, G.; Sato, M.; Jelonnek, J.
2015. IEEE transactions on plasma science, 43, 3517–3521. doi:10.1109/TPS.2015.2420682 -
Development of a 10 kW microwave applicator for thermal cracking of lignite briquettes
Lepers, B.; Link, G.; Jelonnek, J.
2015. COMSOL Conference 2015, Grenoble, F, October 14-16, 2015 -
Mikrowellenunterstützte Pultrusion von CFK-Strangprofilen
Link, G.; Kayser, T.; Ghomeshi, R.; Milwich, M.
2015. Energieeffizienter Leichtbau : Abschlussveranstaltung der Projekte Flame / Presche / Pulform / SoWeMa, Augsburg, June 24-25, 2015 -
Optimierte Mikrowellentechnik für das Aushärten von Faserverbundwerkstoffen
Link, G.; Betz, S.
2015. Energieeffizienter Leichtbau : Abschlussveranstaltung der Projekte Flame / Presche / Pulform / SoWeMa, Augsburg, June 24-25, 2015 -
Microwave processing of hydroxyapatite scaffolds
Hassan, M. N.; Link, G.; Mahmoud, M. M.; El-Fattah, A. A.; Kandil, S.
2015. Materials Science and Technology (MS & T 2015), Columbus, Ohio, October 4-8, 2015 -
Microwave system for in-situ dielectric and calorimetric measurements in a wide temperature range using a TE₁₁₁-mode cavity
Ramopoulos, V.; Soldatov, S.; Link, G.; Kayser, T.; Gehringer, M.; Jelonnek, J.
2015. IEEE MTT-S International Microwave Symposium (IMS 2015), Phoenix, AZ, USA, May 17–22, 2015 -
Principles of design for industrial microwave applicators
Link, G.; Ramopoulos, V.; Jelonnek, J.
2015. 15th International Conference on Microwave and High Frequency Heating, Krakow, PL, September 14-17, 2015 -
Thermal cracking of lignite briquettes for gasification in pressurized reactors with a 10 kW microwave applicator
Lepers, B.; Link, G.; Jelonnek, J.; Zink, M.
2015. 15th International Conference on Microwave and High Frequency Heating, Krakow, PL, September 14-17, 2015 -
Modelling of microwave assisted bonding of synthetic leather to plastic substrates
Soldatov, S.; Meiser, J.; Lepers, B.; Link, G.; Jelonnek, J.
2015. 15th International Conference on Microwave and High Frequency Heating, Krakow, PL, September 14-17, 2015 -
Microwave technology for efficient curing of fiber composites, an overview about the FLAME project
Kayser, T.; Link, G.; Sun, Y.; Ghomeshi, R.; Betz, S.; Köster, F.; Weiß, R.; Heidbrink, F.; Nuss, V.; Seitz, T.; Jelonnek, J.
2015. 15th International Conference on Microwave and High Frequency Heating, Krakow, PL, September 14-17, 2015 -
The role of the native oxide shell on the microwave sintering of copper etal powder compacts
Mahmoud, M. M.; Link, G.; Thumm, M.
2015. Journal of Alloys and Compounds, 627, 231–237. doi:10.1016/j.jallcom.2014.11.180 -
System for in-situ dielectric and calorimetric measurements during microwave curing of resins
Ramopoulos, V.; Soldatov, S.; Link, G.; Kayser, T.; Jelonnek, J.
2015. German Microwave Conference (GeMic 2015), Nürnberg, March 16-18, 2015 -
System for in-situ dielectric and calorimetric measurements during microwave curing of resins
Ramopoulos, V.; Soldatov, S.; Link, G.; Kayser, T.; Jelonnek, J.
2015. 9th German Microwave Conference (GeMic 2015), Nürnberg, March 16-18, 2015. Proceedings, 29–32, IMATech e.V. doi:10.1109/GEMIC.2015.7107744