Publikationen


CO2 conversion with atmospheric pressure plasmas sustained with ultra-short microwave pulsations
Soldatov, S.; Link, G.; Navarrete, A.; Silberer, L.; Dittmeyer, R.; Jelonnek, J.
2022, August 19. 4th Global Congress on Microwave Energy Applications (GCMEA 2022), Chengdu, China, 17.–20. August 2022
Microwave interferometry as a tool for electron density estimation in atmospheric CO2 microwave plasma
Silberer, L.; Soldatov, S.; Link, G.; Jelonnek, J.
2022, Mai. 14th Frontiers in Low Temperature Plasma Diagnostics (FLTPD 2022), Levico Terme, Italien, 1.–5. Mai 2022
Microwave-Assisted Additive Manufacturing of Continuous Fiber Reinforced Thermoplastic Composites: Challenges and Opportunities
Li, N.; Link, G.; Jelonnek, J.
2022, Juni 15. 56th Annual Microwave Power Symposium (IMPI 2022), Savannah, GA, USA, 14.–16. Juni 2022
Combination of Scattering Matrix Code and Process Model to Optimize a Microwave Applicator Suitable for the Stabilization of PAN Fibers
Hofele, J.; Engler, M.; Link, G.; Jelonnek, J.
2022. 2022 14th German Microwave Conference (GeMiC), Ulm, 16-18 May 2022, 232–235, Institute of Electrical and Electronics Engineers (IEEE)
A Multistatic Uniform Diffraction Tomography Algorithm for Microwave Imaging in Multilayered Media for Microwave Drying
Omrani, A.; Yadav, R.; Link, G.; Jelonnek, J.
2022. IEEE Transactions on Antennas and Propagation. doi:10.1109/TAP.2022.3177495
Pulsed microwave plasma for CO2 -recycling
Link, G.; Soldatov, S.; Navarrete, A.; Dittmeyer, R.; Jelonnek, J.
2022, Mai 31. 11th Power Electronics for Plasma Engineering Conference (PE² 2022), Freiburg im Breisgau, Deutschland, 31. Mai–1. Juni 2022
Combination of Scattering Matrix Code and Process Model to Optimize a Microwave Applicator Suitable for the Stabilization of PAN Fibers
Hofele, J.; Engler, M.; Link, G.; Jelonnek, J.
2022, Mai 18. 14th German Microwave Conference (GeMiC 2022), Ulm, Deutschland, 16.–18. Mai 2022
Tomography-assisted control for the microwave drying process of polymer foams
Hosseini, M.; Kaasinen, A.; Link, G.; Aliyari Shoorehdeli, M.; Lähivaara, T.; Vauhkonen, M.
2022. Journal of Process Control, 114, 16–28. doi:10.1016/j.jprocont.2022.03.011
Novel Mixing Relations for Determining the Effective Thermal Conductivity of Open-Cell Foams
Camacho, J. N. Hernandez; Link, G.; Schubert, M.; Hampel, U.
2022. Materials, 15 (6), Art.-Nr.: 2168. doi:10.3390/ma15062168
Correlated Sample-based Prior in Bayesian Inversion Framework for Microwave Tomography
Yadav, R.; Omrani, A.; Link, G.; Vauhkonen, M.; Lahivaara, T.
2022. IEEE Transactions on Antennas and Propagation. doi:10.1109/TAP.2022.3145433
Efficiency of a compact CO coaxial plasma torch driven by ultrafast microwave power pulsing : Stability and plasma gas flow dynamics
Soldatov, S.; Carbone, E.; Kuhn, A.; Link, G.; Jelonnek, J.; Dittmeyer, R.; Navarrete, A.
2022. Journal of CO2 Utilization, 58, Art.-Nr.: 101916. doi:10.1016/j.jcou.2022.101916
A novel augmented reality system to support volumetric visualization in industrial process tomography
Zhang, Y.; Yadav, R.; Omrani, A.; Fjeld, M.
2021. IHCI GET 2021 Proceedings. Proceedings of the IADIS International Conference Interfaces and Human Computer Interaction Proceedings of the IADIS International Conference Game and Entertainment Technologies. Hrsg.: K. Blashki, 3–9, IADIS Press
Modelling the thermal runaway during the stabilization phase of the carbon fiber production using microwave heating
Hofele, J.; Gandert, J.; Link, G.; Jelonnek, J.
2021. AMPERE 2021: 18th International Conference on Microwave and High-Frequency Applications: 13th -16th September 2021, Gothenburg, Sweden, 234, Chalmers University of Technology (Chalmers)
Influence of cavity size and material properties on the uniformity of dielectric heating using distributed sources and novel solid-state microwave amplifiers
Neumaier, D.; Link, G.; Jelonnek, J.
2021. AMPERE 2021: 18th International Conference on Microwave and High-Frequency Applications: 13th -16th September 2021, Gothenburg, Sweden, 155, Chalmers University of Technology (Chalmers)
Effect of initial particle size of the hematite on microwave sintering kinetics at 30 GHz
Togashi, M. M.; Perdomo, C. P. F.; Link, G.; Kiminami, R. H. G. A.
2021. AMPERE 2021 Proceedings, 8th International Conference on Microwave and High - Frequency Applications, 13th - 16th September 2021, 102, Chalmers University of Technology (Chalmers)
Complex-permittivity estimation of a polymer foam using microwave tomography for the application of microwave drying
Yadav, R.; Omrani, A.; Vauhkonen, M.; Link, G.; Lähivaara, T.
2021. AMPERE 2021 Proceedings, 8th International Conference on Microwave and High - Frequency Applications, 13th - 16th September 2021, 42, Chalmers University of Technology (Chalmers)
A compact quarter wavelenght filter for 3D microwave printing of continuous fiber reinforced polymers
Li, N.; Link, G.; Jelonnek, J.
2021. AMPERE 2021: 18th International Conference on Microwave and High-Frequency Applications: 13th -16th September 2021, Gothenburg, Sweden, 1, Chalmers University of Technology (Chalmers)
A time-reversal imaging algorithm for localization and moisture level detection in the polymer foam in an industrial microwave drying system
Omrani, A.; Yadav, R.; Link, G.; Jelonnek, J.
2021. AMPERE 2021 Proceedings, Chalmers University of Technology (Chalmers)
Fast imaging reveals the dynamic of plasma discharge sustained with ultra-short microwave pulsations at atmospheric pressure
Soldatov, S.; Link, G.; Kanesan, D.; Jelonnek, J.
2021, Oktober. 74th Annual Gaseous Electronics Conference (GEC 2021), Online, 4.–8. Oktober 2021
Applicator design - Implementation of certain EM modes
Link, G.
2021, September 13. 18th International Conference on Microwave and High Frequency Application (AMPERE 2021), Online, 13.–16. September 2021
Modeling of the Effective Permittivity of Open-Cell Ceramic Foams Inspired by Platonic Solids
Camacho, J. N. Hernandez; Link, G.; Schubert, M.; Hampel, U.
2021. Materials, 14 (23), Article no: 7446. doi:10.3390/ma14237446
A time-reversal imaging algorithm for localization and moisture level detection in the polymer foam in an industrial microwave dying system
Omrani, A.; Yadav, R.; Link, G.; Jelonnek, J.
2021, September. 18th International Conference on Microwave and High Frequency Application (AMPERE 2021), Online, 13.–16. September 2021
Modelling the thermal runaway during the stabilization phase of the carbon fiber production using microwave heating
Hofele, J.; Gandert, J.; Link, G.; Jelonnek, J.
2021, September 15. 18th International Conference on Microwave and High Frequency Application (AMPERE 2021), Online, 13.–16. September 2021
A compact quarter wavelenght filter for 3D microwave printing of continuous fiber reinforced polymers
Li, N.; Link, G.; Jelonnek, J.
2021, September 14. 18th International Conference on Microwave and High Frequency Application (AMPERE 2021), Online, 13.–16. September 2021
Influence of cavity size and material properties on the uniformity of dielectric heating using distributed sources and novel solid-state microwave amplifiers
Neumaier, D.; Link, G.; Jelonnek, J.
2021, September 15. 18th International Conference on Microwave and High Frequency Application (AMPERE 2021), Online, 13.–16. September 2021
An electromagnetic time-reversal imaging algorithm for moisture detection in polymer foam in an industrial microwave drying system
Omrani, A.; Yadav, R.; Link, G.; Lähivaara, T.; Vauhkonen, M.; Jelonnek, J.
2021. Sensors, 21 (21), Art.Nr. 7409. doi:10.3390/s21217409
LiDAR Based Multi-Robot Cooperation for the 3D Printing of Continuous Carbon Fiber Reinforced Composite Structures
Li, N.; Link, G.; Ma, J.; Jelonnek, J.
2021. Advances in Manufacturing Techno – Proceedings of the 18th International Conference on Manufacturing Research, incorporating the 35th National Conference on Manufacturing Research, 7–10 September 2021, University of Derby, Derby, UK. Ed.: M. Shafik, 125–132, IOS Press. doi:10.3233/ATDE210024
System identification of conveyor belt microwave drying process of polymer foams using electrical capacitance tomography
Hosseini, M.; Kaasinen, A.; Shoorehdeli, M. A.; Link, G.; Lähivaara, T.; Vauhkonen, M.
2021. Sensors, 21 (21), 7170. doi:10.3390/s21217170
Microwave tomography using neural networks for its application in an industrial microwave drying system
Yadav, R.; Omrani, A.; Link, G.; Vauhkonen, M.; Lähivaara, T.
2021. Sensors, 21 (20), 6919. doi:10.3390/s21206919
Small-Size Coaxial Resonant Applicator for Microwave Heating Assisted Additive Manufacturing
Li, N.; Link, G.; Engler, M.; Jelonnek, J.
2021. IEEE transactions on microwave theory and techniques, 69 (11), 4631–4638. doi:10.1109/TMTT.2021.3105431
Control System for 3D Microwave Printing of Continuous Carbon Fiber Reinforced Composites. Masterarbeit
Lölkes, C.
2020. Karlsruher Institut für Technologie (KIT)
Compact Depth Camera based Multi-Robot Control for 3D Microwave Printing. Bachelorarbeit
Ma, J.
2021. Karlsruher Institut für Technologie (KIT)
Multiphysics Simulation Modeling of 3D Microwave Printing Head. Bachelorarbeit
Lu, J.
2021. Karlsruher Institut für Technologie (KIT)
Temperature Dependent In-Situ Dielectric Measurements of PAN Precursor and Stabilized Fibers
Hofele, J.; Link, G.; Jelonnek, J.
2021, Mai 11. Aachen Reinforced! Symposium (2021), Online, 10.–11. Mai 2021
Microwave additive manufacturing of continuous carbon fibers reinforced thermoplastic composites: Characterization, analysis, and properties
Li, N.; Link, G.; Jelonnek, J.; Morais, M. V. C.; Henning, F.
2021. Additive Manufacturing, 44, Art.-Nr.: 102035. doi:10.1016/j.addma.2021.102035
Electrical Capacitance Tomography to Measure Moisture Distribution of Polymer Foam in a Microwave Drying Process
Hosseini, M.; Kaasinen, A.; Link, G.; Lahivaara, T.; Vauhkonen, M.
2021. IEEE Sensors Journal, 21 (16), 18101–18114. doi:10.1109/JSEN.2021.3085762
A Combined Microwave Imaging Algorithm for Localization and Moisture Level Estimation in Multilayered Media
Omrani, A.; Yadav, R.; Link, G.; Vauhkonen, M.; Lahivaara, T.; Jelonnek, J.
2021. 2021 15th European Conference on Antennas and Propagation (EuCAP), 22-26 March 2021, Düsseldorf, Germany, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/EuCAP51087.2021.9411327
LQR control of moisture distribution in microwave drying process based on a finite element model of parabolic PDEs
Hosseini, M.; Kaasinen, A.; Link, G.; Lähivaara, T.; Vauhkonen, M.
2020. 21th IFAC World Congress. Ed.: R. Findeisen, 11470–11476, Elsevier. doi:10.1016/j.ifacol.2020.12.586
Microwave Tomography for Moisture Level Estimation Using Bayesian Framework
Yadav, R.; Omrani, A.; Vauhkonen, M.; Link, G.; Lähivaara, T.
2021. 2021 15th European Conference on Antennas and Propagation (EuCAP), Düsseldorf, 22. - 26. März 2021, Düsseldorf, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/EuCAP51087.2021.9411109
A Combined Microwave Imaging Algorithm for Localization and Moisture Level Estimation in Multilayered Media
Omrani, A.; Yadavz, R.; Link, G.; Vauhkonenz, M.; Lähivaaraz, T.; Jelonnek, J.
2021, März 24. 15th European Conference on Antennas and Propagation (EuCAP 2021), Online, 22.–26. März 2021
A Multistatic Uniform Diffraction Tomographic Algorithm for Real-Time Moisture Detection
Omrani, A.; Link, G.; Jelonnek, J.
2021. 2020 IEEE Asia-Pacific Microwave Conference (APMC), 437–439, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/APMC47863.2020.9331603
Time-Resolved Optical Emission Spectroscopy Reveals Nonequilibrium Conditions for CO Splitting in Atmospheric Plasma Sustained with Ultrafast Microwave Pulsation
Soldatov, S.; Link, G.; Silberer, L.; Schmedt, C. M.; Carbone, E.; D’Isa, F.; Jelonnek, J.; Dittmeyer, R.; Navarrete, A.
2020. ACS energy letters, 6 (1), 124–130. doi:10.1021/acsenergylett.0c01983
Optical Emission Spectroscopy of Atmospheric CO2 Plasma sustained with Ultrafast Pulsed Microwave
Soldatov, S.; Navarrete, A.; Link, G.; Silberer, L.; Schmedt, C. M.; Carbone, E.; D’Isa, F.; Fantz, U.; Jelonnek, J.; Dittmeyer, R.
2020. Conference on Operando Characterization of Catalysts at Work (OperCat 2020), Online, 17.–18. Dezember 2020
A Multistatic Uniform Diffraction Tomographic Algorithm for Real-Time Moisture Detection
Omrani, A.; Link, G.; Jelonnek, J.
2020. Asia-Pacific Microwave Conference (APMC 2020), Online, 8.–11. Dezember 2020
Non-equlibrium atmospheric and microwave sustained plasma for CO₂ Conversion
Link, G.; Soldatov, S.; Navarrete, A.; Schmedt, C. M.; Silberer, L.; Dittmeyer, R.; Jelonnek, J.
2020, Dezember 8. 47th IEEE International Conference on Plasma Sciences (ICOPS) - 2nd Asia-Pacific Conference on Plasma and Terahertz Science (2020), Online, 6.–10. Dezember 2020
Load-dependent path planning method for 3D printing of continuous fiber reinforced plastics
Wang, T.; Li, N.; Link, G.; Jelonnek, J.; Fleischer, J.; Dittus, J.; Kupzik, D.
2021. Composites / A, 140, Article: 106181. doi:10.1016/j.compositesa.2020.106181
Automated microwave tomography (Mwt) image segmentation: State-of-the-art implementation and evaluation
Zhang, Y.; Ma, Y.; Omrani Hamzekalaei, A.; Yadav, R.; Fjeld, M.; Fratarcangeli, M.
2020. Journal of WSCG, 2020, 126–136. doi:10.24132/CSRN.2020.3001.15
Production of continuous carbon fiber reinforced polyamide filaments for microwave additive manufacturing
Li, N.; Link, G.; Jelonnek, J.; Heinzel, A.
2020. SAMPE Europe Conference (2020), Online, 30. September–1. Oktober 2020
AMPERE Newsletter. Issue 104
Link, G. (Hrsg.)
2020
AMPERE Newsletter. Issue 103
Link, G. (Hrsg.)
2020
AMPERE Newsletter. Issue 102
Link, G. (Hrsg.)
2020
AMPERE Newsletter. Issue 101
Link, G. (Hrsg.)
2020
AMPERE Newsletter. Issue 100
Link, G. (Hrsg.)
2019
Experimental and numerical analysis of the complex permittivity of open-cell ceramic foams
Camacho, J. N. Hernandez; Link, G.; Soldatov, S.; Füssel, A.; Schubert, M.; Hampel, U.
2020. Ceramics international, 46 (17), 26829–26840. doi:10.1016/j.ceramint.2020.07.159
Estimation of Moisture Content Distribution in Porous Foam Using Microwave Tomography With Neural Networks
Lähivaara, T.; Yadav, R.; Link, G.; Vauhkonen, M.
2020. IEEE transactions on computational imaging, 6, 1351–1361. doi:10.1109/TCI.2020.3022828
Microwave tomography for estimating moisture content distribution in porous foam using neural networks
Yadav, R.; Vauhkonen, M.; Link, G.; Betz, S.; Lahivaara, T.
2020. IEEE 14th European Conference on Antennas and Propagation (EuCAP), 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.23919/EuCAP48036.2020.9135296
Automatic Image Segmentation for Microwave Tomography (MWT) – From Implementation to Comparative Evaluation
Zhang, Y.; Ma, Y.; Omrani, A.; Yadav, R.; Fjeld, M.; Fratarcangeli, M.
2019. Proceedings of the 12th International Symposium on Visual Information Communication and Interaction - VINCI’2019, Article no: 3356437, Association for Computing Machinery (ACM). doi:10.1145/3356422.3356437
Characterization of CO2 splitting in atmospheric nanosecond pulsed microwave plasma with a highly time resolved OES
Soldatov, S.; Link, G.; Silberer, L.; Schmedt, C. M.; Jelonnek, J.; Dittmeyer, R.; Navarrete, A.
2020, April 16. Online Workshop on Plasma Chemistry and Catalysis (2020), Online, 16. April 2020
Dielectric Measurements of PAN Precursor and Stabilized Fibers
Hofele, J.; Link, G.; Jelonnek, J.
2020. GeMiC 2020, German Microwave Conference : March, 09-11, 2020, Cottbus, 192–195, Institute of Electrical and Electronics Engineers (IEEE)
Rapid 3D microwave printing of continuous carbon fiber reinforced plastics
Li, N.; Link, G.; Jelonnek, J.
2020. CIRP annals, manufacturing technology, 69 (1), 221–224. doi:10.1016/j.cirp.2020.04.057
Dielectric Measurements of PAN Precursor and Stabilized Fibers
Hofele, J.; Link, G.; Jelonnek, J.
2020. 13th German Microwave Conference (GeMiC 2020), Cottbus, Deutschland, 9.–11. März 2020
3D microwave printing temperature control of continuous carbon fiber reinforced composites
Li, N.; Link, G.; Jelonnek, J.
2020. Composites science and technology, 187, Article: 107939. doi:10.1016/j.compscitech.2019.107939
Path-designed 3D printing for topological optimized continuous carbon fibre reinforced composite structures
Li, N.; Link, G.; Wang, T.; Ramopoulos, V.; Neumaier, D.; Hofele, J.; Walter, M.; Jelonnek, J.
2020. Composites / B, 182, Art.Nr. 107612. doi:10.1016/j.compositesb.2019.107612
Charakterisierung eines mikrowellenunterstützten CO2-Plasmas mittels optischer Emissionsspektroskopie. Bachelorarbeit
Silberer, L.
2018. Karlsruher Institut für Technologie (KIT)
Development of Anion Doped Oxide Nano Composite under Microwave Heating
Takayama, S.; Link, G.; Hayakawa, Y.; Fukaya, H.
2018. 12th JEMEA International Symposium (2018), Kitakyūshū, Japan, 15.–16. November 2018
Microwave dielectric properties of open-cell solid foams based on silicon carbide ceramics
Hernandez, J. N. C.; Sodatov, S.; Link, G.; Füssel, A.; Hampel, U.
2019. 17th International Conference on Microwave and High Frequency Heating (2019), Valencia, Spanien, 9.–12. September 2019
Sustaining atmospheric plasma with nanosecond microwave pulses to increase the efficiency of CO2 splitting
Soldatov, S.; Navarrete, A.; Jelonnek, J.; Link, G.; Schmedt, C.; Dittmeyer, R.
2019. KEROGREEN - Workshop "Plasma catalysis for renewable Fuels and Chemicals" (2019), Eindhoven, Niederlande, 15. November 2019
Review on latest research activities on microwave materials processing at KIT
Link, G.
2019. International Collaboration Activity Week on Digital and Intelligent Manufacturing (2019), Nanjing, 28. Oktober–2. November 2019
Microwave Assisted Materials Processing Activities at KIT and Latest Research Results
Link, G.
2019. International Forum on Advanced Manufacturing Technology and Equipment (IFAMTE 2019), Chengdu, China, 28. Oktober 2019
Dielectric monitoring of the pan fiber stabilization process
Hofele, J.; Link, G.; Jelonnek, J.
2019. Proceedings 17th International Conference on Microwave and High Frequency Heating (AMPERE 2019), Valencia, E, September 9-12, 2019, 365–372, Universitat Politècnica de València. doi:10.4995/Ampere2019.2019.9788
Homogeneous dielectric heating in large microwave ovens by excitation of multiple eigenmodes at their resonance frequencies
Neumaier, D.; Sanseverino, S.; Link, G.; Jelonnek, J.
2019. 17th International Conference on Microwave and High Frequency Heating (AMPERE 2019), Valencia, E, September 09-12, 2019, 166–173, Universitat Politècnica de València. doi:10.4995/Ampere2019.2019.9877
Microwave curing of multidirectional carbon fiber reinforced polymer composites
Li, Y.; Li, N.; Zhou, J.; Cheng, Q.
2019. Composite Structures, 212, 83–93. doi:10.1016/j.compstruct.2019.01.027
3D Microwave printing temperature control of continuous carbon fiber reinforced polymer composites
Li, N.; Link, G.; Jelonnek, J.
2019. 17th International Conference on Microwave and High Frequency Heating (2019), Valencia, Spanien, 9.–12. September 2019
CO2 splitting in low temperature atmospheric plasma sustained with nanosecond microwave pulses
Soldatov, S.; Link, G.; Marholz, M.; Jelonnek, J.; Navarrete, A.; Schmedt, C.; Dittmeyer, R.
2019. 31st Joint Russian-German Meeting on ECRH and Gyrotrons (2019), Lenggries, Deutschland, 3.–8. Juni 2019
Homogeneous Dielectric Heating in large Microwave ovens by excitation of multiple eigenmodes at their resonance frequencies
Neumaier, D.; Sanseverino, S.; Link, G.; Jelonnek, J.
2019. 17th International Conference on Microwave and High Frequency Heating (2019), Valencia, Spanien, 9.–12. September 2019
Short nanosecond microwave pulses for sustaining CO2 plasma at atmospheric pressure: advances and challenges [in press]
Soldatov, S.; Navarrete, A.; Jelonnek, J.; Link, G.; Schmedt, C.; Dittmeyer, R.
2019. 24th International Symposium on Plasma Chemistry (ISPC24 2019), Neapel, Italien, 9.–14. Juni 2019
CO2 splitting in low temperature atmospheric plasma sustained with nanosecond microwave pulses [in press]
Soldatov, S.; Navarrete, A.; Dittmeyer, R.; Jelonnek, J.; Link, G.; Schmedt, C.
2019. 13th Frontiers in Low-Temperature Plasma Diagnostics & 1st Frontiers in Low-Temperature Plasma Simulations (2019), Bad Honnef, Deutschland, 13.–16. Mai 2019
Dielectric Monitoring of the Pan Fiber Stabilization Process
Hofele, J.; Link, G.; Jelonnek, J.
2019. 17th International Conference on Microwave and High Frequency Heating (2019), Valencia, Spanien, 9.–12. September 2019
Test Set for Dielectric Measurements of Double Layer Laminates
Ramopoulos, V.; Soldatov, S.; Link, G.; Jelonnek, J.
2019. 53rd Annual Microwave Power Symposium (IMPI 2019), Las Vegas, NV, USA, 18.–20. Juni 2019
Split Cavity Design for the Dielectric Characterization of Laminates
Ramopoulos, V.; Soldatov, S.; Link, G.; Jelonnek, J.
2019. 17th International Conference on Microwave and High Frequency Heating (2019), Valencia, Spanien, 9.–12. September 2019
Entwicklung von Antennensystemen zur Anregung von definierten Feldverteilungen in übermodigen Resonatoren. Bachelorarbeit
Sanseverino, S.
2019. Karlsruher Institut für Technologie (KIT)
Numerical Study of Eigenmodes Propagation Through Rectangular Waveguide with Quarter-Wave Chokes on the Walls
Brovko, A.; Link, G.
2019. Recent Research in Control Engineering and Decision Making. Ed.: O. Dolinina, 162–172, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-030-12072-6_15
AMPERE Newsletter. Issue 98
Link, G. (Hrsg.)
2019
Energy Efficiency, Materials and Resources (EMR): Energy-Efficient Processes -Multiphases and thermal processes-
Baureis, L.; Frank, J.; Hofele, J.; Jelonnek, J.; Layer, S.; Link, G.; Neumaier, D.; Nuss, V.; Ramopoulos; Seitz, T.; Soldatov, S.; Wadle, S.
2019. Annual Report 2017 / Institute for Pulsed Power and Microwave Technology / Institut für Hochleistungsimpuls- und Mikrowellentechnik, 41–47, KIT Scientific Publishing. doi:10.5445/IR/1000091764
AMPERE Newsletter. Issue 97
Link, G. (Hrsg.)
2018
AMPERE Newsletter. Issue 96
Link, G. (Hrsg.)
2018
Rohstoffvorwärmung und -vorbehandlung mit elektromagnetischen Wellen
Zink, M.; Link, G.; Lepers, B.; Seitz, T.
2018. Stoffliche Nutzung von Braunkohle. Ed.: S. Krzack, 691–706, Springer Verlag. doi:10.1007/978-3-662-46251-5_25
Modular Microwave Applicator Design for Homogeneous Heating of Tubular Chemical Reactors at Industrial Scale
Ramopoulos, V.; Link, G.; Soldatov, S.; Seitz, T.; Nuss, V.; Jelonnek, J.
2018. 40th Progress In Electromagnetics Research Symposium (PIERS 2018), Toyama, Japan, 1.–4. August 2018
Investigation on Orthogonal Antenna Configurations for Large Scale Microwave Ovens
Soldatov, S.; Link, G.; Neumaier, D.; Ramopoulos, V.
2018. 52nd Annual Microwave Power Symposium (IMPI 2018), Long Beach, CA, USA, 26.–28. Juni 2018
Evaluation of rotational and vibrational temperatures in high-power microwave sustained CO2 plasmas at atmospheric pressure
Silberer, L.; Soldatov, S.; Link, G.; Isa, F. D.; Carbone, E.; Fantz, U.; Jelonnek, J.
2018. 8th International Workshop on Plasma Spectroscopy (IPS 2018), Oxford, Vereinigtes Königreich, 23.–26. September 2018
Model predictive controller for obtaining uniform temperature distribution at industrial heating processes
Wagner, E.; Betz, S.; Horn, F.; Neumaier, D.; Link, G.; Jelonnek, J.
2018. SAMPE Europe Conference 2018, Southampton, UK , September 11-13, 2018
TOMOCON: A Marie Skłodowska-Curie European Training Network on Tomography-based Control in Industrial Processes
Hampel, U.; Wondrak, T.; Fjeld, M.; Mudde, R.; Portela, L.; Kenjeres, S.; Legendre, D.; Link, G.; Koiranen, T.; Hlava, J.; Babout, L.; Jackowska-Strumiłło, L.; Soleimani, M.; Vaukhonen, M.; Lähivaara, T.; Rymarczyk, T.; Trepte, M.; Voutilainen, A.; Rodriguez, M.; Bos, J.; Betz, S.; Hysky, J.; Pennerstorfer, P.; Goldammer, M.; Matten, C.; Hoffmann, R.; Gingras, J.-P.; Plas, D. van der; Veenstra, P.; Nurmi, J.; Pudack, C.; Silva, M. J. da
2018, September 6. 9th World Congress on Industrial Process Tomography (WC-IPT-9), Bath, UK, September 2-6, 2018
Industrial scale microwave applicator for high temperature alkaline hydrolysis of PET
Ramopoulos, V.; Link, G.; Soldatov, S.; Jelonnek, J.
2018. International journal of microwave and wireless technologies, 10 (5-6), 709–719. doi:10.1017/S1759078718000727
Energy Efficiency, Materials and Resources (EMR): Energy-Efficient Processes – Materials Processing with Microwaves
Ayhan, K.; Baureis, L.; Jelonnek, J.; Kayser, T.; Layer, S.; Lepers, B.; Link, G.; Neumaier, D.; Nuss, V.; Ramopoulos, V.; Seitz, T.; Soldatov, S.; Sun, Y.; Wadle, S.
2018. Annual Report 2016 / Institute for Pulsed Power and Microwave Technology / Institut für Hochleistungsimpuls- und Mikrowellentechnik, 89–95, KIT Scientific Publishing. doi:10.5445/IR/1000081156
Simple analytical approach for industrial microwave applicator design
Link, G.; Ramopoulos, V.
2017. Chemical engineering and processing, 125, 334–342. doi:10.1016/j.cep.2017.12.015
Industrial scale microwave applicator for high temperature alkaline hydrolysis of PET
Ramopoulos, V.; Link, G.; Soldatov, S.; Jelonnek, J.
2017. 47th European Microwave Conference, EuMC 2017; Nuremburg; Germany; 10 October 2017 through 12 October 2017, 930–933, EuMa. doi:10.23919/EuMC.2017.8230998
Development of an advanced microwave calorimeter for monitoring of chemical reactions
Ramopoulos, V.; Soldatov, S.; Hetz, M.; Link, G.; Jelonnek, J.
2017. IMPI’s 51st Annual Microwave Power Symposium, Miami, FL, June 20-22, 2017. Proceedings, 64–66, International Microwave Power Institute (IMPI)
Expertise at KIT on microwave sintering and critical assessment on microwave specific effects
Link, G.
2017. Sino-German Symposium on Synthesis, Preparation, New Technology of Inorganic Materials, Zhengzhou, China, November 14-17, 2017
Model of microwave assisted thermal adhesion of synthetic leather to a plastic substrate
Soldatov, S.; Meiser, J.; Lepers, B.; Link, G.; Jelonnek, J.
2016. COMSOL Conference, München, October 12-14, 2016
Microwave assisted bonding of synthetic leather to plastic substrates
Soldatov, S.; Meiser, J.; Lepers, B.; Link, G.; Jelonnek, J.
2016. Proceedings of the 3rd Global Congress on Microwave Energy Applications (GCMEA), Cartagena, E, July 25-29, 2016. USB-Stick. Ed.: J. Fayos-Fernandez, 139–144, CRAI Biblioteca
Anwendungen der HF in der Materialprozesstechnik
Link, G.
2017. Hochfrequenztechnik mit Power : Technologien, Anwendungen und Trends, Karlsruhe, 19.Oktober 2017
Investigation on mm-wave sintering of metal powder compacts using in-situ dilatometry and electrical resistivity measurements
Mahmoud, M.; Link, G.; Jelonnek, J.; Thumm, M.
2017. (A. G. Litvak, Hrsg.) The European physical journal / Web of Conferences, 149, Art. Nr. 02007. doi:10.1051/epjconf/201714902007
Characterization and modeling of epoxy resin reaction kinetics by use of in-situ dielectric measurements
Prastiyanto, D.; Link, G.; Jelonnek, J.; Thumm, M.
2017. Materials Science and Technology Technical Meeting and Exhibition (MS&T 17), Pittsburgh, PA, October 8-12, 2017
The cavity perturbation method: implementation limits for ’classical’ and ’extended’ numerical approaches
Soldatov, S.; Link, G.; Jelonnek, J.
2017. 16th International Conference on Microwave and High Frequency Heating (2017), Delft, Niederlande, 18.–21. September 2017
Transient dielectric characterization of epoxy resins during curing
Prastiyanto, D.; Link, G.; Jelonnek, J.; Thumm, M.
2017. 16th International Conference on Microwave and High Frequency Heating (2017), Delft, Niederlande, 18.–21. September 2017
Investigation on mm-wave sintering of metal powder compacts using in-situ dilatometry and electrical resistivity measurements
Mahmoud, M.; Link, G.; Jelonnek, J.; Thumm, M.
2017. Strong Microwaves and Terahertz Waves : Sources and Applications, 10th International Workshop, Nizhny Novgorod, RUS, July 17-22, 2017, 62–63, Russian Academy of Sciences
Release of hydrogen from nanoconfined hydrides by application of microwaves
Sanz-Moral, L. M.; Navarrete, A.; Rueda, M.; Martín, Á.; Sturm, G.; Stefanidis, G.; Link, G.; Stefanidis, G.
2017. Journal of power sources, 353, 131–137. doi:10.1016/j.jpowsour.2017.03.110
Fabrication of tin oxide-carbon nano composite for energy applications heated by microwave
Takayama, S.; Link, G.; Maruyama, Y.; Watanabe, T.; Tokitani, M.; Hayakawa, Y.; Jelonnek, J.
2017. International Conference on Powder and Powder Metallurgy, Kyoto, J, November 6-9, 2017
Investigation on mm-wave sintering of metal powder compacts using in-situ dilatometry and electrical resistivity measurements
Mahmoud, M.; Link, G.; Jelonnek, J.; Thumm, M.
2017. 10th International Workshop Strong Microwaves and Terahertz Waves: Sources and Applications, Nizhny Novgorod, RUS, July 17-22, 2017
Industrial scale microwave applicator for high temperature alkaline hydrolysis of PET
Ramopoulos, V.; Link, G.; Soldatov, S.; Jelonnek, J.
2017. 47th European Microwave Conference, Nürnberg, October 8-12, 2017
Development of an advanced microwave calorimeter for monitoring of chemical reactions
Ramopoulos, V.; Soldatov, S.; Hetz, M.; Link, G.; Jelonnek, J.
2017. 51st Annual Microwave Power Symposium (IMPI 2017), Miami, FL, USA, 20.–22. Juni 2017
Advanced dual-mode resonator technique for in-situ measurement of lossy materials
Ramopoulos, V.; Spira, T.; Soldatov, S.; Link, G.; Jelonnek, J.
2016. Proceedings of the 3rd Global Congress on Microwave Energy Applications (GCMEA), Cartagena, E, July 25-29, 2016. USB-Stick. Ed.: J. Fayos-Fernandez, 49–52, CRAI Biblioteca
Activities on microwave assisted materials processing for industrial and research use at KIT
Link, G.
2016. International Forum on Advanced Manufacturing Technology and Equipment, Chengdu, China, November 4, 2016
Model of microwave assisted thermal adhesion of synthetic leather to a plastic substrate
Soldatov, S.; Meiser, J.; Lepers, B.; Link, G.; Jelonnek, J.
2016. COMSOL Conference, München, October 12-14, 2016
Microwave processing of solid-state electrolyte for Li-ion batteries N/A
Mahmoud, M. M.; Cui, Y.; Ziebert, C.; Rohde, M.; Link, G.; Seifert, H. J.
2016. 3rd Global Congress on Microwave Energy Applications (GCMEA), Cartagena, E, July 25-29, 2016
Hydrogen from solids by microwave influence N/A
Sanz-Moral, L. M.; Navarrete, A.; Sturm, G.; Link, G.; Stefanidis, G.; Rueda, M.; Martin, A.
2016. 3rd Global Congress on Microwave Energy Applications (GCMEA), Cartagena, E, July 25-29, 2016
Microwaves crystallization of Lithium Aluminum Germanium Phosphate glass-ceramics using 30 GHz processing
Mahmoud, M.; Yuantao, C.; Ahmad, S.; Rohde, M.; Ziebert, C.; Link, G.; Seifert, H.
2016. Materials Science and Technolgy 2016, Salt Lake City, UT, October 23-27, 2016
The critical role of ceramics in the microwave heating of copper metal powder
Mahmoud, M.; Wagner, J.; Link, G.; Thumm, M.
2016. Materials Science and Technolgy 2016, Salt Lake City, UT, October 23-27, 2016
High frequency MW sintering of calcium phosphate based constructs
Hassan, M.; Link, G.; Mahmoud, M.; El-Fattah, A. A.; Kandil, S.
2016. Materials Science and Technolgy 2016, Salt Lake City, UT, October 23-27, 2016
Dielectric characterization of concrete at high temperatures
Soldatov, S.; Umminger, M.; Heinzel, A.; Link, G.; Lepers, B.; Jelonnek, J.
2016. Cement and concrete composites, 73, 54–61. doi:10.1016/j.cemconcomp.2016.01.006
Design rules for large scale industrial microwave applicators
Link, G.; Ramopoulos, V.; Nuss, V.; Jelonnek, J.
2016. 3rd Global Congress on Microwave Energy Applications (GCMEA), Cartagena, E, July 25-29, 2016
Advanced dual-mode resonator technique for in-situ measurement of lossy materials
Ramopoulos, V.; Spira, T.; Soldatov, S.; Link, G.; Jelonnek, J.
2016. 3rd Global Congress on Microwave Energy Applications (GCMEA), Cartagena, E, July 25-29, 2016
Microwave assisted bonding of synthetic leather to plastic substrates
Soldatov, S.; Meiser, J.; Lepers, B.; Link, G.; Jelonnek, J.
2016. 3rd Global Congress on Microwave Energy Applications (GCMEA), Cartagena, E, July 25-29, 2016
Dielectric Characterization for Industrial Microwave Applications
Soldatov, S.; Ramopoulos, V.; Link, G.; Jelonnek, J.
2016. 80. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Regensburg, 6.-11.März 2016.Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.51(2016), DF 6.5
A drying and thermoelastic model for microwave ablation of concrete
Lepers, B.; Link, G.; Jelonnek, J.
2016. 80. Jahrestagung der DPG und DPG-Frühjahrstagung der Sektion Kondensierte Materie, Fachverband Dielektrische Festkörper, Regensburg, 6.-11.März 2016.Verhandlungen der Deutschen Physikalischen Gesellschaft, R.6, B.51(2016), DF 6.6
Sintering of naturally derived hydroxyapatite using high frequency microwave processing
Hassan, M. N.; Mahmoud, M. M.; Link, G. L.; El-Fattah, A. A.; Kandil, S. H.
2016. Journal of Alloys and Compounds, 682, 107–114. doi:10.1016/j.jallcom.2016.04.266
The microwave materials processing group at KIT
Link, G.
2016. Ampere Newsletter, (88), 8–11
Research and development on material processing with microwaves for industrial and research use at KIT
Link, G.; Jelonnek, J.
2016. 9th International Conference on Digital Enterprise Technology (DET 2016), Nanjing, China, March 29-31, 2016